Output power capacity
125.0kWatts / 125.0kVA
(1) Hard wire 5-wire (3P + N + E) (Battery Backup)
(1) Hard wire 4-wire (3P + E) (Battery Backup)
Nominal Output Voltage
400V 3PH, 480V 3PH
Nominal Input Voltage
400V 3PH, 480V 3PH
Hard wire 4-wire (3P + E), Hard wire 5-wire (3P + N + E)
A high-performance, 3-phase, modular, scalable, power protection solution with industry-leading efficiency, capacity, and performance for medium to large data centers and mission critical environments.
Includes: Assembly service, Installation guide, Start-up service, User manual, Web/SNMP management card
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Simplifies installation and UPS maintenance while minimizing space requirements.
LCD graphics touch screen display
Full color text and mimic diagrams that easily display modes of operation, systems parameters and alarms.
During maintenance procedures, maintain full protection by transferring the load from one independent Symmetra PX 250/500kW system to another.
Output synchronization to external source
UPS systems can be synchronized with any other independent source for use with downstream static transfer switches.
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Increases the overall system availability, 2 units running in parallel with active load sharing.
Download the display interface to your laptop or personal computer. Remotely monitor the UPS and configure a sub-set of UPS parameters. Note: Remote start-up and shutdown are not supported.
Symmetra PX Features & Benefits
Total cost of Ownership
Fully-rated power kVA equals kW
Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Input Power Factor Correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
5x8 Start-up service included
Required for full coverage of factory warranty
Provides scalability, N+1 redundancy, fast serviceability, and reduced maintenance requirements via self-diagnosing, hot-swappable, and field-replaceable modules.
Provides remote power management of the UPS over the network.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Configurable for N+1 internal redundancy
Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Swappable power modules
Allows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.
Redundant Intelligence Modules
Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
Power Modules connected in parallel
Enhances availability by allowing immediate, seamless recovery from isolated module failures.
Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
Ensures compatibility with different input frequencies.
Customize UPS capabilities with management cards.
Provides notification of changing utility power and UPS power conditions
LED status indicators
Quickly understand unit and power status with visual indicators.
Integrates with StruxureWare Data Center Expert
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
User-replaceable power modules
Enables simple upgrades and replacements of the Power Modules.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
EU CoC for UPS
Ensures that UPSs sold in the EU are highly efficient
Max Configurable Power (Watts)
500.0kWatts / 500.0kVA
Output Voltage Distortion
Less than 2 %
Output Frequency (sync to mains)
50 Hz +/- 0.1 % For 50 Hz nominal Unsynchronised, 50 Hz Sync to mains, 60 Hz +/- 0.1 % For 60 Hz nominal Unsynchronised, 60 Hz Sync to mains
Other Output Voltages
Double conversion online
10 minutes at 125% and 60 seconds at 150%
Output Voltage THD
< 2% linear load and < 3% non-linear load
Output Voltage Tolerance
+/- 1% static and +/- 5% at 100% load step
2 ms typical
Built-in maintenance bypass, Built-in static bypass
40 - 70 Hz Auto-sensing
Input voltage range for main operations
408 - 552 (480 V)V
Input Total Harmonic Distortion
Less than 5 % for full load
Type of Input Protection Required
3-pole circuit breaker
Other Input Voltages
Maximum Short Circuit Withstand (Icw)
Input Power Factor at Full Load
Batteries & Runtime
External battery system
Extendable Run Time
Efficiency in Battery Operation
Communications & Management
Pre-Installed SmartSlot™ Cards
Touch screen LCD user interface
Emergency Power Off (EPO)
Available SmartSlot™ Interface Quantity
78.4inches (1991MM, 199.1CM)
63.0inches (1600MM, 160.0CM)
42.1inches (1070MM, 107.0CM)
84.6inches (2150MM, 215.0CM)
73.6inches (1870MM, 187.0CM)
50.0inches (1270MM, 127.0CM)
32 - 104 °F (0 - 40 °C)
Operating Relative Humidity
0 - 95 %
0 - 3333ft (0 - 1015.9meters)
-30 - 70 °C
0 - 50000ft (0 - 15240meters)
Audible noise at 1 meter from surface of unit
Online thermal dissipation
IP20, NEMA 1
CSA C22.2 No 107.3-05, CUL listed, EN/IEC 62040-1-1, EN/IEC 62040-2, EN/IEC 62040-3, OSHPD, UL 1778, UL 60950-1, UL listed
1 year on-site repair or replace with factory authorized Start-Up