Eaton 5PX G2 UPS 3000VA 3000W 208V Network Card Included 2U Rack/Tower UPS – 2U Tower – 120 V AC Input – 100 V AC, 120 V AC, 125 V AC Output – 6 x NEMA 5-20R, 1 x NEMA L5-30R 5PX3000HRTNG2


SKU: 5PX3000HRTNG2 Category:


Eaton 5PX G2 UPS 3000VA 3000W 208V Network Card Included 2U Rack/Tower UPS – 2U Tower – 120 V AC Input – 100 V AC, 120 V AC, 125 V AC Output – 6 x NEMA 5-20R, 1 x NEMA L5-30R

3kVA/3kW/208V Battery Backup for Distributed IT, Telecom or Enterprise Deployments
This 5PX G2 rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your valuable IT equipment or destroy data. The 5PX3000HRTNG2 is ideal power management for small business, education, retail, financial or healthcare networking components, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.

Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages
The field-replaceable, hot-swappable internal battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Exclusive ABM technology increases battery life by 50 percent and closely monitors battery health to provide advanced notice when batteries need replacing. You can also connect up to four external battery modules (5PXEBM72RTG2, sold separately) for hours of extended runtime.

Included Gigabit Network Interface Offers 24/7 Remote Access
The NETWORK-M2 network card enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don’t have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. An optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions.

Managed Outlets Protect Your Connected Components
Eight C13 and two C19 managed outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Five outlets are grouped into two load banks that let you shed non-critical loads to extend runtime for critical loads.

ENERGY STAR-Certified to Help You Save Money and Protect the Environment
By meeting strict U.S. Department of Energy requirements, this ENERGY STAR 2.0 UPS system provides high operational efficiency to signal a reduction in BTU emissions, save on utility and cooling costs and help protect the environment.

Rotating LCD Interface and LED Status Bar Keep You Informed at a Glance
The high-contrast front-panel LCD provides detailed alarms and notifications to help diagnose any issues. The lower tri-color LED bar monitors UPS status: a blue light means all is well, a yellow light means your attention is needed, and a red light indicates a critical issue that demands immediate action. The interface rotates to accommodate both rack-mount and tower configurations.

Advanced Communications Ports Allow for Automatic Saves and Shutdowns
RS-232 and USB ports connect to a serial-enabled device for a variety of communication options (cables are included). A dry-contact relay port can be programmed through the LCD to provide reliable communications to automation and industrial components.

Guides & Documents

Specifications are provided by the manufacturer. Refer to the manufacturer for additional explanations. Product may not be exactly as shown.

Status Indicators LCD Display
Environmental Conditions
Sound Emission 45 dB
Network Management Network-M2 Card
Serial Port Yes
USB (HID Compliant) Port Yes
Package Contents
  • 5PX UPS
  • Tower Pedestals
  • 4-post Rail Kit
  • User Manual CD
  • Quick Start Guide
  • USB Cable
  • RS-232 Serial Cable
  • Phillips Head Screw Driver
Country of Origin Philippines
Battery Information
Battery Chemistry Lead Acid
Battery Characteristics Sealed
Replaceable Battery Yes
General Information
Product Type Line-interactive UPS
Manufacturer Part Number 5PX3000HRTNG2
Manufacturer Website Address
Manufacturer Eaton Corporation
Product Name 5PX UPS
Product Series 5PX
Brand Name Eaton
Power Description
Input Voltage 120 V AC
120 V AC
Output Voltage 125 V AC
120 V AC
100 V AC
125 V AC
120 V AC
100 V AC
Waveform Type True Sine Wave
Input Voltage Range 89 V AC – 151 V AC
89 V AC – 151 V AC
Input Frequency 60 Hz
60 Hz
Physical Characteristics
Weight (Approximate) 87 lb
Form Factor Tower
Rack Height 2U
Height 3.4″
Width 17.4″
Depth 25.5″
Product Color Black
Technical Information
Application/Usage Bank
IT Equipment
Network Equipment
Retail Building
Server Room
Storage System
Plug/Connector Type NEMA L5-30P
Receptacle Type NEMA 5-20R
Receptacle Detail 6 x NEMA 5-20R
1 x NEMA L5-30R


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.