Output power capacity
12.0kWatts / 15.0kVA
(1) Hard wire 5-wire (3P + N + E) (Battery Backup)
(1) Screw terminals (Battery Backup)
Nominal Output Voltage
120V, 208V, 208V 3PH
Nominal Input Voltage
Hard wire 5-wire (3P + N + E)
APC Smart-UPS VT 15kVA 208V w/2 Batt Mod., Start-Up 5X8, Int Maint Bypass, Parallel Capable
Effective 10-40kVA 3 phase UPS power protection against downtime and data loss for mission critical applications.
Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network management card, Power modules ship installed, Smart UPS signalling RS-232 cable, Start up included, User manual
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Increases the overall system availability, 2 units running in parallel with active load sharing.
Smart-UPS VT Features & Benefits
EU CoC for UPS
Ensures that UPSs sold in the EU are highly efficient
Provides scalability, N+1 redundancy, fast serviceability, and reduced maintenance requirements via self-diagnosing, hot-swappable, and field-replaceable modules.
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Provides temporary battery power when the utility power is out.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Alpha-Numeric Display which displays system parameters and alarms.
Customize UPS capabilities with management cards.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Ensures compatibility with different input frequencies.
Provides remote power management of the UPS over the network.
LED status indicators
Quickly understand unit and power status with visual indicators.
Provides notification of changing utility power and UPS power conditions
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Allows additional run time to be quickly added as needed.
Total cost of Ownership
Input Power Factor Correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Max Configurable Power (Watts)
12.0kWatts / 15.0kVA
Output Voltage Note
Configurable for 208 and 220V - 3 Phase
Output Voltage Distortion
Less than 5 % at full load
Output Frequency (sync to mains)
57 - 63 Hz For 60 Hz nominal Sync to mains, 60 Hz +/- 0.1 % For 60 Hz nominal Unsynchronised
Other Output Voltages
Load Crest Factor
Double conversion online
Maximum Output Current
Built-in maintenance bypass, Built-in static bypass
40 - 70 Hz
Input voltage range for main operations
165 - 240V
Other Input Voltages
Input Power Factor at Full Load
Batteries & Runtime
Included Battery Modules
Typical recharge time
Nominal Battery Voltage
+/- 192 V (split battery referenced to neutral)
Expected Battery Life (years)
3 - 5
Battery Charge Power (Watts)
Extendable Run Time
Extended Run Options
End of Discharge Battery Voltage
+/- 154 V
Communications & Management
DB-9 RS-232, Smart-Slot
Pre-Installed SmartSlot™ Cards
Multifunction LCD status and control console
Audible and visible alarms : configurable delays
Emergency Power Off (EPO)
59.0inches (1499MM, 149.9CM)
14.0inches (356MM, 35.6CM)
32.0inches (813MM, 81.3CM)
64.7inches (1643MM, 164.3CM)
25.6inches (650MM, 65.0CM)
41.8inches (1062MM, 106.2CM)
Units per Pallet
32 - 104 °F (0 - 40 °C)
Operating Relative Humidity
0 - 95 %
0 - 3333ft (0 - 1015.9meters)
-50 - 40 °C
0 - 50000ft (0 - 15240meters)
Audible noise at 1 meter from surface of unit
Online thermal dissipation
CUL recognized, ISO 14001, ISO 9001, UL 1778
1 year repair or replace, Start-Up Service
Sustainable Offer Status