Run time at full load
Output power capacity
4.2kWatts / 6.0kVA
(1) NEMA L6-30R (Battery Backup)
(1) NEMA L14-30R (Battery Backup)
(4) NEMA 5-20R (Battery Backup)
Nominal Output Voltage
Nominal Input Voltage
APC Smart-UPS RT 6000VA RM 208V to 208/120V
High density, double-conversion on-line power protection with scalable runtime
Includes: CD with software, Rack mounting support rails, Removable support feet, Smart UPS signaling RS-232 cable, User manual
Multiple output voltages
48Vdc, 24Vdc, and 120Vac are available to power all of the equipment in the cabinet.
Smart-UPS On-Line Features & Benefits
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Provides temporary battery power when the utility power is out.
Input Power Factor Correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Provides notification of changing utility power and UPS power conditions
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
LED status indicators
Quickly understand unit and power status with visual indicators.
Provides remote power management of the UPS over the network.
Provides management of the UPS via a serial port.
Customize UPS capabilities with management cards.
Low operating and maintenance costs with proven reliability and intelligent battery management .
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Avoids costly power problems by keeping your IT equipment and data protected and available .
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Save time with easy and convenient remote/network accessibility.
Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Allows additional run time to be quickly added as needed.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Max Configurable Power (Watts)
4.2kWatts / 6.0kVA
Output Voltage Note
Configurable for 208 or 240 nominal output voltage
Efficiency at Full Load
Output Voltage Distortion
Less than 2 %
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz Sync to mains
Other Output Voltages
Load Crest Factor
3 : 1
Double conversion online
Internal bypass (automatic and manual)
50/60 Hz +/- 5 Hz Auto-sensing
Input voltage range for main operations
156 - 236, 85 - 136 AdjustableV
Number of Power Cords
Efficiency at Full Load
Other Input Voltages
Batteries & Runtime
Included Battery Modules
Typical recharge time
Expected Battery Life (years)
3 - 5
Battery Charge Power (Watts)
Extendable Run Time
Extended Run Options
Communications & Management
RJ-45 10/100 Base-T, SmartSlot
Pre-Installed SmartSlot™ Cards
LED status display with load and battery bar-graphs and on line : on battery : replace battery : overload and bypass indicators
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO)
Surge Protection and Filtering
Surge energy rating
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
5.12inches (130MM, 13.0CM)
17.01inches (432MM, 43.2CM)
25.98inches (660MM, 66.0CM)
13.66inches (347MM, 34.7CM)
23.74inches (603MM, 60.3CM)
38.58inches (980MM, 98.0CM)
Units per Pallet
32 - 104 °F (0 - 40 °C)
Operating Relative Humidity
0 - 95 (Non-condensing) %
0 - 10000ft (0 - 3048meters)
-15 - 45 °C
0 - 50000ft (0 - 15240meters)
Audible noise at 1 meter from surface of unit
Online thermal dissipation
CSA, FCC part 15 class A, UL 1778
2 years repair or replace
Sustainable Offer Status
Proposition 65 Warning